New tube amp diy kit required power? - diyAudio
Go Back   Home > Forums > Amplifiers > Tubes / Valves

Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 18th May 2012, 12:56 PM   #1
diyAudio Member
 
Join Date: Feb 2012
Default New tube amp diy kit required power?

Hey all
I've just started looking into diy stuff. Currently building the tritrix mtm speaker kit ( TriTrix MTM TL Speaker Kit Components Only Pair 300-700)

I also want to try a tube amp kit because i want to learn more about electronics and tubes but would this kit http://www.siliconray.com/kits/auido...t.html  be able to power the speakers? the speakers are 8 ohms and the amp supposedly puts out 6w per channel. will I get much volume out of this? its for a medium sized living room.
Thanks all and thank you for any suggestions.
  Reply With Quote
Old 18th May 2012, 02:32 PM   #2
diyAudio Member
 
Osvaldo de Banfield's Avatar
 
Join Date: Dec 2011
Location: Barrio Garay,Almirante Brown, Buenos Aires, Argentina
It strongly depends of the speakers, performance particularly, and the acoustical characteristic of the room, and in personal volume taste. I have a DIY audio set, and with Karlson´s 15" cabinet plus a 12W per channel, the sound makes explode my audio room.
__________________
LW1DSE
  Reply With Quote
Old 19th May 2012, 01:31 PM   #3
chrish is offline chrish  Australia
diyAudio Member
 
chrish's Avatar
 
Join Date: Oct 2003
Location: Sydney
Lets have a look at the specs. The woofers are stated as having 91.8 dB sound pressure level (with 1 watt). Two in the cabinet increases efficiency by 3 dB to approx 95 dB. That is reasonably efficient, however the tweeter is stated as having an efficiency of 89 dB/Mtr. From that I would guess that to design for a reasonably flat response, the crossover would bring the woofers down to a similar sound pressure level. Now to get 3 dB increase in sound pressure level, you double amplifier power. So for 1 watt - 89 dB, 2 watts - 92 dB, 4 watts - 95 dB, 8 watts - 98 dB, 16 watts - 101 dB, 32 watts - 104 dB.

As you see, the exponential relationship of sound pressure to power eats amp power for low efficiency speakers. My first tube amp was a Tubelab simpleSE with about 8 Watts output. My speakers are about 91 dB and I think that 8 watts was about the minimum power I would want. If you are happy with modest listening levels and don't listen to orchestral or loud rock music, it might be ok. If you want high volume levels with music with high dynamic range, you will probably need more power. However, the kit for the amp looks cheap, so it might be worth building it to see if you like it then use it for an amp in the bedroom or office if you subsequently build a higher power amp.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Best DIY power-amp/kit to build? WE91 Solid State 31 5th June 2013 08:25 AM
Trouble with a DIY EL34 Tube Amp Kit elleelle Tubes / Valves 32 21st February 2011 03:55 AM
What's your favourite sounding DIY/kit tube amp? leadbelly Tubes / Valves 1 23rd October 2007 06:50 PM
what tube preamp DIY kit to match B&W P-5 speakers skydog Tubes / Valves 4 22nd January 2004 09:48 PM


New To Site? Need Help?

All times are GMT. The time now is 09:13 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright ©1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2