• WARNING: Tube/Valve amplifiers use potentially LETHAL HIGH VOLTAGES.
    Building, troubleshooting and testing of these amplifiers should only be
    performed by someone who is thoroughly familiar with
    the safety precautions around high voltages.

Resistors and combinations

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
M Gregg

M Gregg

Disabled Account
Joined 2010
I thought it might be interesting,

For people to post combinations of resistors used in their best performing amps and pre amps. (notice I leave the caps out) I know some will laugh, however in my latest project 1st stage cathode resistor has had a major impact on bass and imaging (probably beacuse its part of the FB) and it was not the expensive option that worked the best..

I have tried many types of resistor including tantalum and found this latest combination quite good..

Takman Rey 75 in the signal path..and grid stopper signal/(cathode or LED)
kiwame in the anode and power. or in stopper UL tap.

I know some people will just use whats in the box, however some people may have a preference..(I didn't think the takman REX was very good).

I have other combinations that have worked well..

Regards
M. Gregg
 
Last edited:
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom