Rogers Cadet III Integrated Amp Capacitor Values help

timmo1928 · 28th March 2012, 08:15 AM

I'm currently recapping the amp which had been partially restored before. There are three blue electrolytic capacitors that I can't find the values for as the writing has worn off and I can't find them on the schematics for the separate pre/power version. They look to be small uf and voltage values and might have been replaced before.

Does anybody know what the values are for

The capacitor that is on the balance control

2 identical small capacitors that are just behind the push selector switches

If anybody has replaced the 6.8pf capacitors between the pins on the 2 output valves what type and voltage value did you use.

Thanks in advance to anybody who can help

Alain Dupont · 28th March 2012, 11:30 AM

timmo1928,

you should have a look at :

Rogers Cadet III stereo integrated amplifier

Alain.

timmo1928 · 29th March 2012, 07:51 AM

Thanks for your reply but the schematic and components list are actually for the seperate pre and power amp version and don't show the capacitors I'm trying to find the values for.

timmo1928 · 17th May 2012, 12:32 AM

Just in case anyboy needs theis information. I've got hold of another Cadet amp and the values of the capacitors in it are

The capacitor that is on the balance control - 125uf 4 volt

The 2 identical small capacitors that are just behind the push selector switches - 50uf 3 volt

timmo1928 · 17th May 2012, 09:43 AM

I mistyped t hev voltage of the 2 identical small capacitors that are just behind the push selector switches - which are 50uf 6.4 volt

28th March 2012, 08:15 AM	#1
timmo1928 diyAudio Member Join Date: Sep 2011	Rogers Cadet III Integrated Amp Capacitor Values help I'm currently recapping the amp which had been partially restored before. There are three blue electrolytic capacitors that I can't find the values for as the writing has worn off and I can't find them on the schematics for the separate pre/power version. They look to be small uf and voltage values and might have been replaced before. Does anybody know what the values are for The capacitor that is on the balance control 2 identical small capacitors that are just behind the push selector switches If anybody has replaced the 6.8pf capacitors between the pins on the 2 output valves what type and voltage value did you use. Thanks in advance to anybody who can help

28th March 2012, 11:30 AM	#2
Alain Dupont diyAudio Member Join Date: Sep 2003 Location: Paris - France	timmo1928, you should have a look at : Rogers Cadet III stereo integrated amplifier Alain. __________________ Did live about 10 years in Canada Back to France since the 1st February 2007.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Rogers Cadet III input impedance	cr0wl3y	Tubes / Valves	3	25th November 2010 09:37 PM
Rogers Cadet III integrated	harlequin	Tubes / Valves	3	26th March 2010 07:33 PM
Rogers Cadet III Advice & Opinions Needed	Thomo	Tubes / Valves	4	25th October 2007 07:14 AM
Rogers Cadet III Schematics	needlesview	Tubes / Valves	23	14th September 2007 08:50 AM
Rogers Cadet III PU Adapter	Jon Bradbury	Tubes / Valves	16	19th January 2007 03:45 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

29th March 2012, 07:51 AM	#3
timmo1928 diyAudio Member Join Date: Sep 2011	Thanks for your reply but the schematic and components list are actually for the seperate pre and power amp version and don't show the capacitors I'm trying to find the values for.

17th May 2012, 12:32 AM	#4
timmo1928 diyAudio Member Join Date: Sep 2011	Just in case anyboy needs theis information. I've got hold of another Cadet amp and the values of the capacitors in it are The capacitor that is on the balance control - 125uf 4 volt The 2 identical small capacitors that are just behind the push selector switches - 50uf 3 volt

17th May 2012, 09:43 AM	#5
timmo1928 diyAudio Member Join Date: Sep 2011	I mistyped t hev voltage of the 2 identical small capacitors that are just behind the push selector switches - which are 50uf 6.4 volt