I am going to try my hand at my first tube amp build, I have pretty much settled on the RH 84 I will be using the old Iron from a Zenith 5k29 I have the schematic but I am trying to wrap my head around how I will translate this into the physical layout/ build If anyone has detailed photos(particularly underside) of an RH 84 build that they can share I would very grateful
http://www.diyaudio.com/forums/tubes-valves/144699-rh84-finish.html
the rh was my first built also, very good for first build.
i got alitle carry away with the wiring
the rh was my first built also, very good for first build.
i got alitle carry away with the wiring
Note: rotate the output transformers 90degrees from the power transformer if they are going to be this close. Leave a little space.
I did not have the room to do this, therefor the amp had a small amount of hum audible with efficient speakers.
A very nice sounding project, you will enjoy it.
Have fun, be safe.
I did not have the room to do this, therefor the amp had a small amount of hum audible with efficient speakers.
A very nice sounding project, you will enjoy it.
Have fun, be safe.
Attachments
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.