diyAudio (
-   Tubes / Valves (
-   -   High Current Maida (

BRSHiFi 5th February 2012 11:10 PM

High Current Maida
1 Attachment(s)
Hi guys,

I am experimenting with the Maida topology to create a regulator that puts out 500V and 600mA for a powerful amplifier I am building. So far the results have been funny, a breakdown may occur and other times it works fine. The regulator sometimes looses its ability to regulate effectively, meaning about 2 volts or so of 120Hz ripple. Replacing the regulator fixed it on my last test. I have had stability issues on previous tests too.

Something seems to be ruining the regulator, I suspect power ups and downs. I have protection diodes across the 317. The schematic for my setup is attached. Does anyone have any suggestions for improvement?

BRSHiFi 5th February 2012 11:14 PM

Somehow this was posted twice, please delete this one.

All times are GMT. The time now is 11:30 AM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999-2017 diyAudio

Content Relevant URLs by vBSEO 3.3.2