Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum

very low impedance white follower with 6H13C
very low impedance white follower with 6H13C
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 20th December 2011, 04:07 PM   #1
kees52 is offline kees52  Netherlands
diyAudio Member
Join Date: May 2009
Location: Sprang-capelle Holland.
Default very low impedance white follower with 6H13C

Hi All

I have tryed to made a white follower with the mu=2 6as7, 6H13C tube, purpose is driving mosfets with this tube who is low voltage and high current low impedance so I can temper the mosfets to do what I want.

But if the Mu is low it is not easy to get idle oke, it has differential supply of 125 volt each, after regulator 110 volt, the tube take to much idle except if I rise resistors to 470 ohm or higher, she get pretty warm, it is the mu that casue this a higher mu is better to regulate it needs less negative grid voltage, the only way to get around is a seperate supply for the grid so I can use lower resistor value,s.

I know, here are a lot people who get idea,s and so please if you can help me I am very happy, let me now how I can get around the different supply, I want to use dc coupling to fets like I did with the amp now working, so need diff supply, ubtil now I can only use higher resistors, but tube has lower plate voltage then, this concerns me a bit.....

I had a idea to made a srpp driving the mosfets, then I have no follower but a amplifier/driver of 2, this way it is nice to test what the sound then is, a bit more second harmonic can made the mosfets more warm sounding.

thanks for your help.
Attached Images
File Type: gif whitefollower-driver.gif (92.9 KB, 179 views)

Last edited by kees52; 20th December 2011 at 04:09 PM. Reason: picture
  Reply With Quote


very low impedance white follower with 6H13CHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Changing input impedance of a source follower? JoeBob Solid State 10 1st February 2011 02:46 PM
Pentode cathode follower output impedance Bitrex Tubes / Valves 0 7th January 2010 03:19 AM
Cathode Follower Buffer Input Impedance xcortes Tubes / Valves 5 1st December 2005 06:10 PM
output impedance of source follower and load in mH? AudioGeek Solid State 2 19th November 2005 12:02 AM
dissimilar triode for White cathode follower? needtubes Tubes / Valves 6 11th March 2005 02:30 AM

New To Site? Need Help?

All times are GMT. The time now is 06:39 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.00%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio