diyAudio (
-   Tubes / Valves (
-   -   MCC with Fisher (

Glowin Plates 5th December 2011 01:25 AM

MCC with Fisher
Hi All

I had a friend give me a moving coil cartridge so I bought a step up transformer(Pro-Ject phono box) for it and found I couldn't use it with my old Fisher 800C as I guess the step up transformer loads the Fishers phono section pre-amp? with distortion as a result.
The only thing that sounded OK was using the Aux/Tape input which I use for my CD player.
Is it possible to tweak the bias on one of the phono inputs to use a MCC directly into the amp?

Eli Duttman 5th December 2011 01:49 AM

IIRC, the Pro-Ject phono box is a phono preamp, which should be used in combination with a line level I/P.

No, you can't use a LOMC cart. directly into the Fisher's phono section. Gain is INSUFFICIENT. To use a LOMC cart. with the built in phono section, you need to acquire step up transformers. Possibilities include the offerings of CineMag, Jensen, and Sowter.

All times are GMT. The time now is 09:26 AM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999-2017 diyAudio

Content Relevant URLs by vBSEO 3.3.2