Using different ouputs for two different drivers - diyAudio
Go Back   Home > Forums > Amplifiers > Tubes / Valves

Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 10th October 2011, 12:02 AM   #1
diyAudio Member
 
john dozier's Avatar
 
Join Date: Dec 2010
Location: columbia sc
Default Using different ouputs for two different drivers

Is there any advantage to using two different OPT outputs to drive the woofer and tweeter in a two way designed for bi-wiring? I would like both opinions and real world experience. Thanks
__________________
Evil looms. Cowboy up. Kill it. Get Paid.
  Reply With Quote
Old 10th October 2011, 12:58 PM   #2
DF96 is online now DF96  England
diyAudio Member
 
Join Date: May 2007
Which OPT secondary would provide the negative feedback? No nfb means high output impedance which destroys any possible tiny gain from bi-wiring.
  Reply With Quote
Old 10th October 2011, 03:26 PM   #3
diyAudio Member
 
smoking-amp's Avatar
 
Join Date: Dec 2001
Location: Hickory, NC
There is some info in the RDH4 on pages 185 and 887,888 on frequency selective outputs. Seem rather complex for any more than 6 dB/octave crossover. Any secondary feedbacks would have to be frequency tailored too.
__________________
I want a Huvr-Board!!
  Reply With Quote
Old 10th October 2011, 04:28 PM   #4
diyAudio Member
 
john dozier's Avatar
 
Join Date: Dec 2010
Location: columbia sc
The amp in question is a No NFB design. I am concerned about other problems though. Thanks
__________________
Evil looms. Cowboy up. Kill it. Get Paid.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Distorted ouputs, need more assistance please RiLoWa Solid State 3 30th May 2011 04:36 PM
JBL comp drivers, Dayton Reference Sub drivers for auction NO RESERVE pkpickard Swap Meet 1 21st January 2009 03:19 AM
FS: Line Array Drivers - 84 drivers only $200.00! Magnetar Swap Meet 1 23rd August 2007 04:34 PM
Open-Baffle dipoles...a heresy to pair PA drivers w/ home drivers? thadman Multi-Way 7 11th November 2006 09:11 PM
Need help with power supply, ~12v source: 9v, 5v, and 3.3v ouputs mbcouple Power Supplies 3 2nd September 2005 06:19 PM


New To Site? Need Help?

All times are GMT. The time now is 04:29 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2