|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum |
| diyAudio Sponsor | ||
|
||
 |
|
|
Thread Tools | Search this Thread |
3rd October 2011, 11:20 PM
|
#1 |
|
diyAudio Member
Join Date: May 2011
Location: Chile
|
Srpp simple explanation
Hello , i have a question ; on an srpp circuit with top and down tube .
It is supposed that B+ is 300V so , on each plate of the top tube must be connected to this 300V? (both plates?) , and also both tubes must be biased ? i know they are very basic questions , if somebody could explain in simple words how srpp works will be very appreciated . |
|
|
3rd October 2011, 11:48 PM
|
#2 |
|
diyAudio Member
Join Date: Mar 2007
Location: Auckland, NZ
|
__________________
Yes, conservatism thrives on low intelligence and poor information. But the liberals in politics... continue to back off, yielding to the supremacy of the stupid. It's turkeys all the way down. - George Monbiot, guardian.co.uk, 6 Feb 2012 |
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| I need an explanation. | Alexrmc92 | Instruments and Amps | 25 | 12th October 2011 07:51 PM |
| Explanation wanted | Hojvaelde | Tubes / Valves | 8 | 28th May 2011 02:37 PM |
| Schematic explanation | johnnystulic2004 | Solid State | 1 | 20th October 2010 04:11 PM |
| Explanation for this problem? | Rob11966 | Tubes / Valves | 4 | 22nd September 2007 04:39 AM |
| CAT 5 cable explanation? | Joe04 | Parts | 5 | 3rd March 2004 09:48 PM |
| New To Site? | Need Help? |
| Page generated in 0.06738 seconds (69.61% PHP - 30.39% MySQL) with 10 queries |
