|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum |
| diyAudio Sponsor | ||
|
||
 |
|
|
Thread Tools | Search this Thread |
10th August 2011, 08:28 AM
|
#1 |
|
diyAudio Member
Join Date: Sep 2010
|
10 megaohms??
could that possibly be a 10M resistor? There is another one 4,7M as well?
or maybe it is a deliberately made error View image: Copy of Vox AC15 HTVH heritage Page 04 |
|
|
10th August 2011, 12:01 PM
|
#2 |
|
diyAudio Member
Join Date: May 2010
Location: Ball Ground, GA
|
All is correct. The 4.7 meg resistor is somewhat higher than typical, but still workable. The 10 meg resistors are there simply to keep a ground reference supplied to the coupling caps, so that there are no loud pops as the different selections are made. Their value is intentionally high, so that they play no actual part in the characteristics of the circuit.
Dave |
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 10 x Elna Cerafine 10,000uf 63V capacitors NOS | arfer | Swap Meet | 18 | 23rd February 2012 08:03 PM |
| Coral Flat-10 (Beta Look-Alike) 10" Fullrange Drivers | thetubeguy1954 | Full Range | 37 | 20th August 2011 11:47 AM |
| Audio Technology 10 C 77 25 10 KAP Advice | domtweaker | Multi-Way | 9 | 6th August 2011 10:19 PM |
| Isophon P30/37/10 + DHB 6/2-10 drivers | Jamh | Multi-Way | 6 | 20th January 2011 05:20 PM |
| Interest check: Gershman GA-10 10" fiberglass woofers (NEW) | Hogwild | Swap Meet | 1 | 8th October 2010 01:22 PM |
| New To Site? | Need Help? |
| Page generated in 0.06288 seconds (64.01% PHP - 35.99% MySQL) with 10 queries |
