• WARNING: Tube/Valve amplifiers use potentially LETHAL HIGH VOLTAGES.
    Building, troubleshooting and testing of these amplifiers should only be
    performed by someone who is thoroughly familiar with
    the safety precautions around high voltages.

ecl11 - ecl86 replacement

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Hi !
Yes you can do that. Those adaptors were quite popular (in germany for sure) and they were available in shops. Look here, that's what you need: Inter ECL11 E / ECL 11 E Radio-Röhre, ECL86 + Adapter | eBay

Since the 965WK is a Superhet, the ECL11 is only used for low frequency amplification and can be substituted with the ECL86. You will even get more gain due to higher µ of the triode section. You don't have to worry about the supressor grid in the ECL86. It is connected to the cathode internally, that's where it should be connected.

There is a fabulous homepage where you can read more about using replacing old tubes (for radio use, nothing useful for audiophools here): Umsockeln_von_Roehren

Have fun with your radio, it's lovely one.
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.