diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Tubes / Valves (http://www.diyaudio.com/forums/tubes-valves/)
-   -   Dynaco ST-70 chassis (http://www.diyaudio.com/forums/tubes-valves/191862-dynaco-st-70-chassis.html)

rsumperl 1st July 2011 05:40 PM

Dynaco ST-70 chassis
 
Good afternoon everyone,
Can someone who has a Dynaco ST-70 please measure the opening for the PC board and email me or post the opening size?

Thanks,
Ray

indianajo 1st July 2011 06:42 PM

2 3/4" x 6 7/32". Screw holes are 3"x4." Tape measure does not have a calibration sticker traceable to NIST.
Amp was a 1961 Dynakit, according to the builder I bought it from in 1970.

quadtech 2nd July 2011 11:55 AM

1 Attachment(s)
Attached the dimensions I took sometime back. Pls verify and
use at your own risk. All dimensions are in millimeters.


All times are GMT. The time now is 06:47 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2