Best method of reducing line voltage into vintage transformers? - Page 2

trobbins · 28th June 2011, 09:09 AM

Transformer insulation between primary and secondary, and secondary and secondary can be very different, and certainly requires different standards compliance. One meets basic/reinforced requirements, the other can be functional only.

The magnetising current increases with voltage. A normal transformer would have to cope with +10% rated mains voltage. If the original was rated 115, then you are asking it to nominally cope with 125+10%. If it was prone to getting hot at 115 (for example), then the balance may well be tipped at 138V.

costis_n · 28th June 2011, 10:42 AM

Quote:

Originally Posted by trobbins

Transformer insulation between primary and secondary, and secondary and secondary can be very different, and certainly requires different standards compliance. One meets basic/reinforced requirements, the other can be functional only.

The magnetising current increases with voltage. A normal transformer would have to cope with +10% rated mains voltage. If the original was rated 115, then you are asking it to nominally cope with 125+10%. If it was prone to getting hot at 115 (for example), then the balance may well be tipped at 138V.

Yes you should always observe the VA ratings of each winding and the total VA rating.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Reducing transformer voltage...	69CamaroSS396	Power Supplies	7	27th May 2009 08:25 PM
reducing voltage	rtill	Solid State	28	16th January 2009 01:45 PM
Reducing PSU Voltage	hernanstafe	Parts	1	9th March 2007 05:14 PM
Best way of reducing heater voltage?	showdown	Tubes / Valves	14	20th July 2006 07:15 PM
Reducing Voltage in a safe way.	darkm4n	Solid State	106	7th March 2004 12:44 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

28th June 2011, 09:09 AM	#11
trobbins diyAudio Member Join Date: Feb 2009 Location: Melbourne, Oz	Transformer insulation between primary and secondary, and secondary and secondary can be very different, and certainly requires different standards compliance. One meets basic/reinforced requirements, the other can be functional only. The magnetising current increases with voltage. A normal transformer would have to cope with +10% rated mains voltage. If the original was rated 115, then you are asking it to nominally cope with 125+10%. If it was prone to getting hot at 115 (for example), then the balance may well be tipped at 138V.