diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Tubes / Valves (http://www.diyaudio.com/forums/tubes-valves/)
-   -   phase splitter (http://www.diyaudio.com/forums/tubes-valves/188432-phase-splitter.html)

grungeman91 5th May 2011 01:34 AM

phase splitter
 
Has anyone ever tested a concertina phase splitter and had the signal not be out of phase at the cathode in comparison to the plate. I'm testing this now and the signals are not out of phase.

SY 5th May 2011 01:57 AM

You may want to figure out what you've miswired or set up incorrectly in your measurement. Details?

llwhtt 5th May 2011 01:58 AM

I assume you looking at an o'scope, are you looking at each signal separately (single trace) or at the same time (dual trace)? If you are looking at them separately you'll not see the difference due to triggering of the of the sweep. You'll need a dual trace to see it or at least that's the easiest way.

Craig


All times are GMT. The time now is 10:54 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2