k-12G turret board version - diyAudio
Go Back   Home > Forums > Amplifiers > Tubes / Valves
Home Forums Rules Articles diyAudio Store Gallery Wiki Blogs Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 5th April 2011, 03:37 AM   #1
diyAudio Member
Join Date: Mar 2010
Default k-12G turret board version

I have built a turret board version of the K-12G. A separate transformer providing DC on the filaments eliminated most of the usual needed mods, made a quieter filament supply, and separated it from possible interference from the HV power supply. Using a larger enclosure allowed me to route wires away from interference; the power supply is in a separate bay inside the metal enclosure. Normal upgrades on caps and OTs make this a capable amp.

I can't figure one thing--it works great without feedback---but makes a terrible squeal if I try to connect it. Any ideas on that?

Click the image to open in full size.
  Reply With Quote
Old 5th April 2011, 05:19 AM   #2
diyAudio Member
Join Date: Feb 2011
Location: South Wales, UK
Could be that the output transformer secondary connections are phased wrong. One connection is grounded, the other goes back to the input stage via the feedback components. Try swapping these two connections on one channel to see if it cures the squeal. If it works do the other channel too, if that is squealing. Alternately, you could could swap the anode connections to the transformer, if that is easier.
  Reply With Quote
Old 5th April 2011, 10:02 AM   #3
diyAudio Member
Soonerorlater's Avatar
Join Date: Jul 2008
Location: Belfast
Made that mistake when fitting Hammond 1609's to the similar K502 kit.

If Payitforwardeddie's advice doesn't work perhaps you could check to see if your negative feedback resistor has been bypassed with a small cap, my K502 didn't like it being left out. In this case the oscillation was more high pitched, unlike the terrible wale I got from the positive feedback caused by getting the phase wrong on the output transformers.

HTH Bill

Last edited by Soonerorlater; 5th April 2011 at 10:04 AM.
  Reply With Quote


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Sure Electronics TA2024 board version 1.4 jackplug Class D 0 1st February 2011 05:42 PM
WTB "old version" TP sabre 16 DAC board peterhenk Swap Meet 0 18th October 2009 10:45 AM
Single side version of JensRasmussen's Super Leach board / ground planes bigpanda Solid State 6 22nd April 2008 10:29 PM
Super Tamp now has board Version B Marsfrogie Class D 6 19th February 2008 08:21 PM
Turret terminal board for line stage construction? Burnedfingers Tubes / Valves 22 5th March 2006 11:52 PM

New To Site? Need Help?

All times are GMT. The time now is 10:52 AM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999-2017 diyAudio

Content Relevant URLs by vBSEO 3.3.2