|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum |
| diyAudio Sponsor | ||
|
||
 |
|
|
Thread Tools | Search this Thread |
26th March 2011, 08:05 PM
|
#1 |
|
diyAudio Member
Join Date: Mar 2011
|
VT100mk2 - Retubing
Hello everybody. My first post here
So. Having failed to find in my town a technician available or reliable to make the retubing of my ARC VT100mk2 I decided to do it by myself following the instructions on the web: Stereo Setup 2001. While adjusting the bias on the two quartets of 6550 power is simple, the problem it is rather complicated (for me) for the calibration of the tube bias driver 6922 because you need to adjust the two trimmers for each channel on the points R7-R8 and R 11 R12-so that the difference is not greater than 0.01 mV. Questions: - Could i only adjust 6550 quartet and leave unchanged 6922 bias? - Is it necessary that the 6922 is a matched quartet (hard to find) or two matched pairs are the same for each channel? Sorry for my bad english |
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Retubing my amp (EL84, ECC81, ECC83) - Tube recommendations? | horace | Tubes / Valves | 18 | 18th December 2007 01:54 PM |
| Advice for retubing VTL Ichiban`s | webercarbmann | Tubes / Valves | 4 | 4th June 2007 08:48 PM |
| Advice for retubing VTL Ichiban`s | webercarbmann | Tubes / Valves | 1 | 28th May 2007 07:15 AM |
| New To Site? | Need Help? |
| Page generated in 0.06512 seconds (67.41% PHP - 32.59% MySQL) with 10 queries |
