|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum |
| diyAudio Sponsor | ||
|
||
 |
|
|
Thread Tools | Search this Thread |
13th March 2011, 01:45 AM
|
#1 |
|
diyAudio Member
Join Date: Oct 2009
Location: Binghamton, NY
|
7984's
Greetings everyone,
Well finally got around to firing up some 7984's. I'm using 500v on the plate and 250v on the screen. I set idle current to ~50ma/tube. P2P load is 3.3K. I'm using the driver board from a Dynaco Mark III. Well, the sound isn't half bad. I have everything hooked up as Dynaco had it in their Mark III. Think I'll try the 8150's in the same setup. Ray |
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
| New To Site? | Need Help? |
| Page generated in 0.04872 seconds (63.98% PHP - 36.02% MySQL) with 9 queries |
