diyAudio (
-   Tubes / Valves (
-   - PP KT88 (

tim614 17th February 2011 05:16 AM PP KT88
Hi, I have been wanting to built this pp kt88 on the above site but I've only built a few se amp including se kt88.
Recently I came across a pair of ppp 6l6 balwdwin amp with massive ptx rated @ 800vct-350ma so I was thinking of building something with it like the pp kt88 on the above site.
So my question is can I run higher b+ like 450v for the kt88 and around 250v for the driver stage? I know kt88 can hadle more than 500v on the plate but I'm not sure about the driver stage because of the interstage trans which I know very litlle about but I'm planing to buy the same interstage trans for the project.


All times are GMT. The time now is 04:18 PM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2015 DragonByte Technologies Ltd.
Copyright 1999-2015 diyAudio

Content Relevant URLs by vBSEO 3.3.2