diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Tubes / Valves (http://www.diyaudio.com/forums/tubes-valves/)
-   -   Power Supply Question (http://www.diyaudio.com/forums/tubes-valves/182149-power-supply-question.html)

coldcathode 30th January 2011 03:01 PM

Power Supply Question
 
I amp building Pete Millet's Tube Xover. I want to place a grounded cathode 6SN7 gain stage before the crossover board.

I have a Torroidal transformer with dual 150 volt secondaries that will supply the PCBoard with the secondaries in series and the connection at the center tap position.

Is it possible to also parallel a tube rectifier from that point for the B+ (single supply) of the gain stage?

I have used parallel rectifier tube before but never came across a situation like this.

On the xover board the center tap is "0" volts relative to the B+ and B- but on the gain stage it would be "Earth" relative to the B+ only. Will this cause issues with current flowing along the signal grounds?

SemperFi 30th January 2011 10:52 PM

Yes


All times are GMT. The time now is 06:47 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2