Will this circuit work Ok?

el156 · 31st December 2010, 03:55 PM

I would like your coments about tis circuit that i am planing for later on this winter! will it work ok?
Thanks
Silvino

Svein_B · 31st December 2010, 04:53 PM

If you want to use the first double-triode as a diff-amp, you should plan for a cathode CCS, which will need a negative rail of at least some 6-8V, preferably 15-20.

You will need a bypass cap for the The EL156 cathode resistor.

If you do not have a very high output pre-amp, the input sensitivity might not be sufficient, especially if you plan some 6-10dB global feedback.

SveinB.

el156 · 31st December 2010, 05:44 PM

Quote:

Originally Posted by Svein_B

If you want to use the first double-triode as a diff-amp, you should plan for a cathode CCS, which will need a negative rail of at least some 6-8V, preferably 15-20.

You will need a bypass cap for the The EL156 cathode resistor.

If you do not have a very high output pre-amp, the input sensitivity might not be sufficient, especially if you plan some 6-10dB global feedback.

SveinB.

Thanks for your comment! Maybe i should use a ECC83 instead ECC88 to have more gain. And the Bypass cap of course!
Silvino

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Will this circuit work?	Kolloi	Solid State	3	26th February 2008 05:20 PM
Why can"t I get this circuit to work???	Minion	Chip Amps	10	16th December 2007 10:19 PM
Will this circuit work?	G	Tubes / Valves	21	17th February 2007 04:41 AM
How does that circuit work ?	Bernhard	Digital Source	0	28th April 2005 07:03 PM
Would this circuit work???	cunningham	Solid State	10	31st January 2005 05:16 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read

31st December 2010, 04:53 PM	#2
Svein_B diyAudio Member Join Date: Oct 2005	If you want to use the first double-triode as a diff-amp, you should plan for a cathode CCS, which will need a negative rail of at least some 6-8V, preferably 15-20. You will need a bypass cap for the The EL156 cathode resistor. If you do not have a very high output pre-amp, the input sensitivity might not be sufficient, especially if you plan some 6-10dB global feedback. SveinB.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)