|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum |
| diyAudio Sponsor | ||
|
||
 |
|
|
Thread Tools | Search this Thread |
21st December 2010, 10:59 PM
|
#1 |
|
diyAudio Member
Join Date: Jun 2004
Location: Indiana
|
LED bias with gNFB
Maybe my searching skills are not the best but I was unable to find a reference to this point. Is there any reason why an amplifier with LED bias on the first stage could not also use gNFB applied from the OPT secondary to the cathode of the first stage by putting a small resistor under the LED (from LED to ground) and applying the FB signal to the top of that resistor?
__________________
mike - www.keepingsundayspecial.org |
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| LED cathode bias - how to pick LED? | sharpi31 | Tubes / Valves | 32 | 9th November 2010 08:55 AM |
| LED bias cathodyne | mashaffer | Tubes / Valves | 3 | 4th August 2010 12:07 AM |
| LED bias indicator | scottw | Tubes / Valves | 6 | 6th December 2007 11:19 AM |
| LED Bias Modifications | dsavitsk | Tubes / Valves | 30 | 9th September 2007 06:55 PM |
| grid LED bias? | fred76 | Tubes / Valves | 13 | 4th August 2006 12:00 AM |
| New To Site? | Need Help? |
| Page generated in 0.06276 seconds (69.64% PHP - 30.36% MySQL) with 10 queries |
