diyAudio

diyAudio (http://www.diyaudio.com/forums/index.php)
-   Tubes / Valves (http://www.diyaudio.com/forums/tubes-valves/)
-   -   LED bias with gNFB (http://www.diyaudio.com/forums/tubes-valves/179587-led-bias-gnfb.html)

mashaffer 21st December 2010 11:59 PM

LED bias with gNFB
 
Maybe my searching skills are not the best but I was unable to find a reference to this point. Is there any reason why an amplifier with LED bias on the first stage could not also use gNFB applied from the OPT secondary to the cathode of the first stage by putting a small resistor under the LED (from LED to ground) and applying the FB signal to the top of that resistor?

SY 22nd December 2010 12:01 AM

No reason at all.


All times are GMT. The time now is 07:50 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 18.75%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio

Wiki