Frank's EC8010/6C45P-GM70 SE Interstage. - diyAudio
Go Back   Home > Forums > Amplifiers > Tubes / Valves

Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 13th December 2010, 11:21 PM   #1
Zekk is offline Zekk  Singapore
diyAudio Member
 
Join Date: Mar 2009
Default Frank's EC8010/6C45P-GM70 SE Interstage.

Hi Folks,

After month's of scudding thru the various Forums, I was delighted to come across Frank's EC8010/6C45P-GM70 SE Interstage
schematics posted in Nov.2002.

Why Frank's ?
Well ... not too complicated 2 stages design and above all, one of the few guys out there whose schematic I can safely rely on.

Anyone built it?
Care to share your experience and insight !?

[B]6C33C and GM-70

With Regards,

Zekk.
  Reply With Quote
Old 13th December 2010, 11:52 PM   #2
diyAudio Member
 
Join Date: Sep 2009
1. Do note that you will be using voltages above 1.2kV (translated as DANGEROUS to a newbie)
2. You will need a good interstage transformer (translated as EXPENSIVE)
3. You will need very high voltage output transformers (translated as SUPER EXPENSIVE).

But no one is going to stop you from trying. Just be extremely careful and know what you are getting yourself into.

Last edited by quikie22; 13th December 2010 at 11:59 PM.
  Reply With Quote
Old 14th December 2010, 07:16 AM   #3
diyAudio Member
 
Vinylsavor's Avatar
 
Join Date: Feb 2002
Location: Lindau
Hi!

EC8010 or this Russkie are no good choices as drivers for a transmitting tube output stage. Way too little headroom. Non linearities due to grid current will kick in around -0,7V at the EC8010. This is one of those designs where you will have significant changes in sound by small changes of op point, especially in the driver.

Sometimes simple can be too simple.

Best regards

Thomas
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
GM70 SE Amplifier gabrielbecheanu Tubes / Valves 35 18th July 2011 04:01 AM
480-0-480vac To Power A SE GM70!?? Zekk Tubes / Valves 42 1st January 2011 02:57 AM
GM70 an 813 strapped in SE-UL - circuits? otto88 Tubes / Valves 45 28th August 2009 12:23 AM
any example of SE designs using GM70? jarthel Tubes / Valves 3 31st May 2007 08:10 AM
Kirung's GM70 SE-Amps from Korea WALTER BURKHARD Tubes / Valves 2 23rd January 2006 02:24 PM


New To Site? Need Help?

All times are GMT. The time now is 03:46 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2