My First Tube Amp Build: S5 K12G My First Tube Amp Build: S5 K12G - diyAudio
Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum

My First Tube Amp Build: S5 K12G
My First Tube Amp Build: S5 K12G
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 9th December 2010, 07:28 PM   #1
DisasterArea is offline DisasterArea  Canada
diyAudio Member
Join Date: Oct 2010
Default My First Tube Amp Build: S5 K12G

Click the image to open in full size.

Finally done my first tube amp kit! I've built a bunch of smaller headphone amps before, but this was my first full size amp build. It's a stock k-12g tube amplifier kit with some of the mods listed at I replaced all the stock caps in the amp section with Orange drops, I added snubber caps and connected the first and last heater pins to balance the inrush current. I had to put the tube sockets up on "stilts", thanks to James Bartlett's write up for that idea, in order to mount the tubes on the top of the chassis. I replaced the provided volume pot with an ALPS pot. I also added a bleeder resistor to the largest cap in the power supply section.

The transformers are mounted on top of the chassis withe the OPT's 90 degree angles to the power transformer. The PCB is hung from the top of the chassis so that everything was attached to the top of the chassis so I could remove the bottom to do further work. All the chassis bits and parts where ordered from VT4C, I love the look, but more on VT4C later. I was fastidious about double and triple checking everything as I went so luckily it worked perfectly on first power up. And it sounds SWEET I was really worried about hum, but this amp seems to have almost negative hum... I listened to some live recordings that I love, but have significant background hiss and they almost sounded like a studio recording through this amp. I'm using a tube magic DAC in between the k12g and a sony blu-ray player and I couldn't be happier with the sound, much fuller sound with great presence as compared to the NAD 3220 I was previously using.

Now onto the bad. I went with VT4C after seeing many others here have used him. I have to admit, his stuff looks great and I have no complaints about all the little bits and bobs I bought, but I have some serious issues with the chassis and transformer casings. The machining accuracy was terrible. The transformer casings weren't perfectly square so I had some issues assembling them. The whole chassis was built with terrible accuracy. Instead of drilling all the holes accurately, it seems like they just made all the holes bigger than the screws used in them. I gave up assembling the chassis like I would usually, I had to but all the screws in loosely all at the same time then tighten them a little at the time and even so there where a couple screws I just couldn't put in because the holes didn't line up and I had to do a lot of drilling, sanding, cutting and scraping to get everything to fit nicely. Not a fun job when your workshop consists of a kitchen table and a dremel tool The supplied screws and bolts where terribly cheap as well, they stripped like I was shoving fifties down their pants... I had to be VERY careful with any screws I planned on being able to unscrew later on... some of them I highly doubt I'll ever be able to take out again.

Maybe I caught them on a bad day, but I'll be trying someone else in the future for buying a chassis.

Last edited by DisasterArea; 9th December 2010 at 07:35 PM.
  Reply With Quote
Old 9th December 2010, 08:11 PM   #2
DisasterArea is offline DisasterArea  Canada
diyAudio Member
Join Date: Oct 2010
I forgot to take pics of the internals, but I'll be adding new volume and input selector knobs soon, so I'll take some then
  Reply With Quote
Old 9th December 2010, 08:20 PM   #3
adamus is offline adamus  United Kingdom
diyAudio Member
Join Date: Apr 2008
tis a beaut mate!!
  Reply With Quote
Old 9th December 2010, 10:15 PM   #4
Soonerorlater is offline Soonerorlater  United Kingdom
diyAudio Member
Soonerorlater's Avatar
Join Date: Jul 2008
Location: Belfast
My First Tube Amp Build: S5 K12G
  Reply With Quote
Old 10th December 2010, 12:25 AM   #5
Miniwatt is offline Miniwatt  Netherlands
diyAudio Member
Miniwatt's Avatar
Join Date: Nov 2004
Location: Den Haag
That's another first time build with amazing looks! Lots of eye candy here lately, keep it up newbies!
  Reply With Quote
Old 10th December 2010, 05:36 AM   #6
ronaldw441 is offline ronaldw441  United States
diyAudio Member
Join Date: Aug 2008
Location: Broomfield, CO
"stripped like I was shoving fifties down their pants"... Good line.

Too bad you had such trouble with the chassis but it does look great!

Nice job
  Reply With Quote
Old 11th December 2010, 05:39 AM   #7
Mr_Zenith is online now Mr_Zenith  United States
diyAudio Member
Mr_Zenith's Avatar
Join Date: Aug 2009
Awesome job!

Several months ago I was considering purchasing some transformer cases from vt4c, but ultimately decided it was too much of a PITA with shipping and all. While I sincerely hate you had to go though such a hassle, I am glad to finally get an idea of what their stuff is really like. Methinks I'll steer clear of them now.

Chassis-wise I'd say you definitely made chicken salad out of, er... guano.

Again, that's a fine build, sir!
  Reply With Quote
Old 8th February 2011, 09:47 PM   #8
caudalie is offline caudalie
diyAudio Member
Join Date: Feb 2011
What an amazing result!
I wish I could make something like that!
Well I have a dumb question: what are the 2 pots on the case for?
One is for volume I guess but the other one...?
The kit which serves as a basis has only one pot (correct me if I'm wrong) so I was wondering what the second knob was for?
Ain't that stupid?
  Reply With Quote


My First Tube Amp Build: S5 K12GHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
A few questions about transformer placement in an S5 K-12 tube amplifer Maxwell Smart Tubes / Valves 10 9th August 2010 07:42 PM
Sub amp/speaker to compliment S5 electronics K 12 G tube amp xxguitarist Tubes / Valves 0 22nd April 2009 02:57 AM
new s5 tube amp kit audioblast Tubes / Valves 2 13th November 2007 05:45 AM
LM3886 or S5 K12M? ...chip or tube Kenkaru Chip Amps 3 14th January 2007 02:37 PM
S5 Electronics 139 $ tube amp Gubby Tubes / Valves 4 19th November 2004 04:28 PM

New To Site? Need Help?

All times are GMT. The time now is 11:02 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio