• WARNING: Tube/Valve amplifiers use potentially LETHAL HIGH VOLTAGES.
    Building, troubleshooting and testing of these amplifiers should only be
    performed by someone who is thoroughly familiar with
    the safety precautions around high voltages.

A new design

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Hello builders, it's a joy to be here with such an energetic group!
I just finished my new power amp and here's a photo of my preamp/headphone amp. I will be doing a preamp for my system that will have a headphone output but will be more preamp than head amp.
Here's a photo of the preamp/headphone amp. I'll post some photos of my power amp when all the bugs are worked out.
I have a new pot in design (active) but that will have to wait a couple of days as i need a rest from the last design.

Hope I can contribute and learn from you all.

best,
Rob
 

Attachments

  • Merlyn-photo2.JPG
    Merlyn-photo2.JPG
    19.9 KB · Views: 164
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.