• WARNING: Tube/Valve amplifiers use potentially LETHAL HIGH VOLTAGES.
    Building, troubleshooting and testing of these amplifiers should only be
    performed by someone who is thoroughly familiar with
    the safety precautions around high voltages.

Unknown PP output transformers

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Hi everybody,

3 years ago I got on the bay a NOS pair of identical PP output transformers.
The end bells say respectively:
FT4725698-138305E and FT4725698-138217E
The core is a 1_3/4 inch stack of EI 1_1/8 inch lamination
Primary inductance is about 250H @ 5Vrms, 50Hz, plate to plate with a DC resistance of 125+125 ohm.
They weight 2.2Kg each and look like an A470, maybe a bit smaller...
Nominal impedances, from voltage ratio measurements, are:
Primary: 7.0 Kohm plate to plate
Second: 0-8-16-32 ohm, tapped

Does anybody know the manufacturer and their use ?
Thank you, Franco
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.