diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Tubes / Valves (http://www.diyaudio.com/forums/tubes-valves/)
-   -   5-pin plug needed (http://www.diyaudio.com/forums/tubes-valves/178462-5-pin-plug-needed.html)

bob91343 3rd December 2010 10:49 PM

5-pin plug needed
 
I need a broken 807 tube or other very old style tube plug to mate with the S-meter socket on a Hallicrafters S-20R. I don't want to sacrifice a good tube but I do need a plug.

I have single pins I can use but that's a bit dangerous so would rather have the plug as a unit. Can anyone help?

kevinkr 3rd December 2010 11:08 PM

Quote:

Originally Posted by bob91343 (Post 2386613)
I need a broken 807 tube or other very old style tube plug to mate with the S-meter socket on a Hallicrafters S-20R. I don't want to sacrifice a good tube but I do need a plug.

I have single pins I can use but that's a bit dangerous so would rather have the plug as a unit. Can anyone help?


These are sometimes available on eBay in the vintage electronics section and under antique radios. I have found them at Hamfests as well.

Miles Prower 3rd December 2010 11:10 PM

Ask George (Tubelab). He's got lots of broken 807s, and might have some.

tubelab.com 4th December 2010 12:17 AM

Quote:

Ask George (Tubelab). He's got lots of broken 807s, and might have some.
Too late. I had literally 50 or more busted 807's and 1625's. I have far too much stuff and have been paying rent to keep it all, so the stuff that I am not going to use in the next two lifetimes has all been eliminated.

lakeside 4th December 2010 12:50 AM

1 Attachment(s)
Will these work for you? They fit a standard UX-5 socket (like a Type 27.tube). If you can use them PM me your mailing address, you can have them (free). I also have a couple dead 27's around.


All times are GMT. The time now is 09:14 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2