Constructions of ShuGang's 211 and 805A
I took a photo of ShuGang's 211 and 805A which were manufactured recently.
The photo is located at below URL.
I understood the difference between 805A (Mu=50) and 211 (Mu=12.5)
comes from the dimensions of Grid-Filament, Grid-Plate and Grid winding pitch.
Is there a question here?
The main difference between the two tubes is the grid pitch (211 grid wires are almost twice as far apart per turn than the 805 grid wires) and the spacing between the grid and plate. the plate of the 211 is very close to its grid whereas the plate of the 805 is spaced considerably further from its grid.
Thanks for the photos. It is interesting to see the construction differences. Your photo shows them close up and very clearly.
|All times are GMT. The time now is 01:12 PM.|
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright ©1999-2014 diyAudio