diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Tubes / Valves (http://www.diyaudio.com/forums/tubes-valves/)
-   -   UTC Z-2961 input transformer (http://www.diyaudio.com/forums/tubes-valves/177860-utc-z-2961-input-transformer.html)

mltube 25th November 2010 12:49 AM

UTC Z-2961 input transformer
 
1 Attachment(s)
Any good use for these? These were given to me by a good friend, but I cannot find any data on this model.
It came out of a RCA Video reel to reel machine that was parted out at a local TV station. The machine was from the sixties and all solid state.
Thank you in advance for any information you may have.
Cheers
mltube

mltube 25th November 2010 01:18 AM

Another from RCA video machine
 
3 Attachment(s)
Here is another, but much larger. I measured the DCR on all legs, very low resistance here.
Unsure what this one was used for in the video machine, any ideas?...
Thank you

mltube 25th November 2010 01:46 AM

And Last one Unknown transformer
 
3 Attachment(s)
Here is the las one. Unknown, from the same RCA video machine.
I hope that I can find a use for these, (Did I say they were FREE!!:D)
Just hoping someone may have an idea or two.
I'm almost sure the smaller UTC's in the first post can be arranged for input, but I have never had the money to do transformer input yet.
This may be a first...
Once again thank you for any input you may have (good or bad).
mltube


All times are GMT. The time now is 06:15 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2