diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Tubes / Valves (http://www.diyaudio.com/forums/tubes-valves/)
-   -   Strip board project completed. (http://www.diyaudio.com/forums/tubes-valves/177844-strip-board-project-completed.html)

M Gregg 24th November 2010 06:10 PM

Strip board project completed.
 
4 Attachment(s)
Just for fun here is a strip board project just completed!
I just wondered what I could power with a laptop power supply.
So here are the boards, they were modified through the project.
:)

Regards
M. Gregg

M Gregg 24th November 2010 06:22 PM

1 Attachment(s)
Input section:

M Gregg 24th November 2010 06:26 PM

2 Attachment(s)
Chassis built with a few wooden blocks.

M Gregg 24th November 2010 06:31 PM

3 Attachment(s)
Start of the build. I will post some more shortly.




Regards
M. Gregg

M Gregg 24th November 2010 06:48 PM

I had a few problems with the regulator this was solved here:

http://www.diyaudio.com/forums/tubes...regulator.html

This has been flashed to Gnd and is still working OK.:)

M Gregg 24th November 2010 06:54 PM

2 Attachment(s)
Regulators fitted and first tube section in place.

M Gregg 24th November 2010 06:59 PM

3 Attachment(s)
Start of the enclosure build.

Glass front plate and input phono sockets fitted.:)
I will post more shortly.

M Gregg 24th November 2010 07:05 PM

More to follow shortly.

Regards
M. Gregg

Soonerorlater 24th November 2010 07:19 PM

Such a neat contrast to my spaghetti breadboard projects - very nice

:)

M Gregg 24th November 2010 09:28 PM

2 Attachment(s)
Testing and set up of EM80 tubes. Cooling in place.:)


All times are GMT. The time now is 10:04 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2