|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
24th November 2010, 04:42 PM
|
#1 |
|
diyAudio Member
Join Date: May 2005
Location: colorado
|
6v6 PP biasing question
Hi all adn thanks in advance for you help
I am trying to bias a Dared vp16 integrated. I have done so in the past with my cheapo multimeter. I am getting a very consistent reading of .75 v at all check terminals. it is supposed to be .25, and was last biased at .225 after i had it worked on i have changed out a couple tubes to slightly stronger ones. how could have it changed so much? it sure doesn't seem to be running stupid hot or anything. any comments would be appreciated. |
|
|
24th November 2010, 06:46 PM
|
#2 |
|
diyAudio Member
Join Date: Jul 2008
Location: Belfast
|
I've found cheapo multimeters very useful - as long as the battery isn't low ( or replaced with one of these fake Chinese batteries I've come across ). Beg borrow or steal another just to be sure and remeasure.
HTH 
|
|
|
|
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 6v6 pp amplifier | alexmoose | Tubes / Valves | 49 | 23rd June 2008 02:26 PM |
| 6V6 PP power xfrmr | cornman | Tubes / Valves | 2 | 10th May 2007 06:48 AM |
| 6v6 PP - No sound | gary f | Tubes / Valves | 12 | 19th April 2006 01:25 PM |
| 6V6 PP under construction - pics | gary f | Tubes / Valves | 8 | 1st April 2006 03:53 PM |
| Poindexter's 6v6 PP amp | Cassiel | Tubes / Valves | 34 | 10th October 2005 02:56 AM |
| New To Site? | Need Help? |
