Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum

Scott LK48-B restoration
Scott LK48-B restoration
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 24th October 2010, 03:19 AM   #1
fullrangeSR is offline fullrangeSR  Canada
diyAudio Member
Join Date: Dec 2008
Unhappy Scott LK48-B restoration

I’ve changed a bunch of parts in my Scott LK48-B: all the coupling caps, all the electrolytics and all the resistors out of spec… I made a stupid mistake when soldering the four 100uF bias caps: I forgot that the can was common positive… That cost me one 10 Ohm resistor (burnt), one 100 uF cap (blown) and the very strong and original 5AR4 – gone… Once I replaced the faulty components (33-Ohm instead of 10-Ohm brought the negative bias to -46V) I turned the power on. What I got now was very strong hum (regardless of the volume)… I quickly measured the voltage behind the rectifier: 430V DC but then it starts going down… At the same time the AC is present after the rectifier: 600-something volts and rising… I immediately shut off the power…
What’s causing the hum and the stratospheric AC voltage? Are there any more leaking/bad electrolytics caused by my mis-wiring? My Heathkit IT-11 is not working currently so I can’t check the caps; and I hate to de-solder everything – the space inside the amp is so tight, it takes forever to do any kind of work…Not to mention the fact that I don’t know where to start…
  Reply With Quote
Old 24th November 2010, 09:00 PM   #2
fullrangeSR is offline fullrangeSR  Canada
diyAudio Member
Join Date: Dec 2008
I finally found the time to work on the amp some more… All the caps are fine, resistors as well… Voltages are identical to those in the schematic… But: there’s the hum… Not too loud but it’s there nevertheless… When the loudness control is at the minimum a faint sound (CD player hooked into the EXTRA input) can be heard from both speakers. As the loudness control is turned up only one channel gets louder, the other stays barely audible… Any ideas/explanations as to what might be taking place here?
  Reply With Quote
Old 24th November 2010, 10:52 PM   #3
kevinkr is offline kevinkr  United States
diyAudio Moderator
kevinkr's Avatar
Join Date: Sep 2004
Location: Boston, Massachusetts
Scott LK48-B restoration
Do you have a scope or can you borrow one? Most likely in the restoration you have made a wiring mistake or you have a bad capacitor or in some cases a dead tube. A scope will help you to quickly find where you are loosing the signal.
"To argue with a person who has renounced the use of reason is like administering medicine to the dead." - Thomas Paine
  Reply With Quote


Scott LK48-B restorationHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
1300DC Restoration mechanicalman Solid State 2 4th February 2009 05:25 AM
Photos of my restoration binary Solid State 23 17th November 2006 12:58 PM
Old violin restoration Panicos K Instruments and Amps 2 2nd November 2006 03:06 PM
vintage restoration tenderland Tubes / Valves 2 28th June 2005 07:08 AM
CD Restoration Stryder Digital Source 5 2nd March 2003 01:06 AM

New To Site? Need Help?

All times are GMT. The time now is 12:12 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio