KT88 SE Complete Kit

[alexg]

Originally Posted by porkchop61

Looks good! I've been running the Abdellah amp for over two years now and am very happy with the sound. Nice to be able to roll different tubes also.
It's nice to see someone offering this in kit form as it's a good beginner project. Some people are a bit put off by the fabrication/metalwork aspect, it should sell pretty well.

You should add an option to use LED bias on the driver, after I switched my build to this I won't go back to RC. Just my preference, but a lot of people I've talked to prefer the sound. It would be a simple option to the kit.
JMTC

Glenn

I am also still using my build of this amp. I built this amp for some friends too.

Really nice design from Mikael Abdellah.

[ixe13]

Good timing,

I have a pair of EDCOR output transformers just waiting to be use with a KT-88 SE amp.


Would defenitivly be interested if its possible to get the kit without the transformers...

[Extreme_Boky]

I'd like to know the price and transformer quality

Boky

[parb]

ive been eyeing that abdellah schematic for quite some time but never gotten out of the gate.

if you got something nice going then i'm interested depending on the $$$....

would a kit be ready and shipped before x-mas? this would make an enjoyable holiday project.

[MrMister]

I´m very interested aswell depending on the price!

[scott17]

This project is still alive and I am working on it daily. The resistor, capacitor, connectors, etc. package is done. That's the easy part.

Getting a relatively aesthetic chassis made for a reasonable cost is one of the main objectives, and I'm close to getting that done.

The transformers will be custom and of high-quality. The current plan is to have them mount flat, like the photo of the chrome output transformers I previously posted.

I am reluctant at this time to offer pricing, but suffice it to say that the cost will be as fair as possible based on the quality of parts to be offered.

To have the kit ready for Christmas may be pushing it, can't promise anything.

Thanks for the interest, because this indeed is a fine sounding amp.

Scott

[SoNic_real_one]

I am interested too... if price is ok.

[Extreme_Boky]

Originally Posted by scitizen17

This project is still alive and I am working on it daily. The resistor, capacitor, connectors, etc. package is done. That's the easy part.

Getting a relatively aesthetic chassis made for a reasonable cost is one of the main objectives, and I'm close to getting that done.

The transformers will be custom and of high-quality. The current plan is to have them mount flat, like the photo of the chrome output transformers I previously posted.

I am reluctant at this time to offer pricing, but suffice it to say that the cost will be as fair as possible based on the quality of parts to be offered.

To have the kit ready for Christmas may be pushing it, can't promise anything.

Thanks for the interest, because this indeed is a fine sounding amp.

Scott

Sounds good. As I mentioned already, I am interested in this kit... don't forget the mains transformer primary options for 240V AC (Australia).

Boky

[skippyboy]

Originally Posted by Extreme_Boky

Sounds good. As I mentioned already, I am interested in this kit... don't forget the mains transformer primary options for 240V AC (Australia).

Boky

I second that.

[yan6]

also interested if price is right.