KT88 SE Complete Kit - Page 2

scott17 · 23rd October 2010, 10:58 PM

Hi folks,

There appears to be some interest in this project.

Please give me a few more days to complete the pricing. I'm still waiting on vendor pricing for the transformers.

I will post the schematic probably by the end of next week.

Just an FYI, the amp is a variation on the Abdellah design with a few modifications.

Thanks.

katana2112 · 23rd October 2010, 11:21 PM

Also interested.

skippyboy · 24th October 2010, 12:56 AM

Short form kit would good

scott17 · 24th October 2010, 04:31 AM

The amp is around 5 - 7 watts in triode mode and a little over 10 watts in ultralinear mode.

Quote:

Originally Posted by mackinthebox

whats the approximate power output of this amp?
Im slowly learning but dont have the knowledge to know if figure that out yet...
I might be interested in a kit, its a nice looking amp!
it also depends on pricing as well... so approx price would be nice

najo49 · 24th October 2010, 04:05 PM

I am very interested in you SE KT 88 kit. Could you keep me in the loop and let me know the particulars as they unfold.You could count on me to act quickly if this continues to look as good as it does with the little info I now have. Thanks for you consideration. Jan Olsen

porkchop61 · 25th October 2010, 08:31 PM

Looks good! I've been running the Abdellah amp for over two years now and am very happy with the sound. Nice to be able to roll different tubes also.
It's nice to see someone offering this in kit form as it's a good beginner project. Some people are a bit put off by the fabrication/metalwork aspect, it should sell pretty well.

You should add an option to use LED bias on the driver, after I switched my build to this I won't go back to RC. Just my preference, but a lot of people I've talked to prefer the sound. It would be a simple option to the kit.
JMTC

Glenn

platypus · 25th October 2010, 09:40 PM

Yes. I would also be interested.

Marky Mark · 26th October 2010, 05:50 PM

p { margin-bottom: 0.08in; } I am interested in purchasing 10 of these as I know this would be the best reproduction of sound my ears have ever heard.

reytnz · 26th October 2010, 10:21 PM

Interested as well

syyma · 27th October 2010, 04:07 AM

Interested and would like to know the price too.

23rd October 2010, 10:58 PM	#11
scott17 diyAudio Member Join Date: Aug 2009 Location: JFK	Schematic, Pricing, Pics Hi folks, There appears to be some interest in this project. Please give me a few more days to complete the pricing. I'm still waiting on vendor pricing for the transformers. I will post the schematic probably by the end of next week. Just an FYI, the amp is a variation on the Abdellah design with a few modifications. Thanks.

23rd October 2010, 11:21 PM	#12
katana2112 diyAudio Member Join Date: Jan 2008	Also interested. __________________ Aggressively Passive

25th October 2010, 08:31 PM	#16
porkchop61 diyAudio Member Join Date: Aug 2004 Location: Mansfield, Connecticut	Looks good! I've been running the Abdellah amp for over two years now and am very happy with the sound. Nice to be able to roll different tubes also. It's nice to see someone offering this in kit form as it's a good beginner project. Some people are a bit put off by the fabrication/metalwork aspect, it should sell pretty well. You should add an option to use LED bias on the driver, after I switched my build to this I won't go back to RC. Just my preference, but a lot of people I've talked to prefer the sound. It would be a simple option to the kit. JMTC Glenn __________________ "Imagination is more important than knowledge"

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Best Complete KT88 Amp Kit under $1K?	ZenZoo	Tubes / Valves	8	2nd December 2012 12:14 PM
AnalogMetric 6L6GC SE amp kit...thoughts about this kit?	jmillerdoc	Tubes / Valves	2	16th November 2009 02:51 PM
Kt88 Se	overdrajv	Tubes / Valves	0	16th December 2008 12:26 PM
"Complete" SE KT88	Sherman	Tubes / Valves	12	26th February 2005 09:52 PM
Kt88 Se	hacknet	Tubes / Valves	9	10th September 2004 08:19 AM


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

24th October 2010, 12:56 AM	#13
skippyboy diyAudio Member Join Date: Jun 2008 Location: nsw	Short form kit would good

24th October 2010, 04:05 PM	#15
najo49 diyAudio Member Join Date: Oct 2010	I am very interested in you SE KT 88 kit. Could you keep me in the loop and let me know the particulars as they unfold.You could count on me to act quickly if this continues to look as good as it does with the little info I now have. Thanks for you consideration. Jan Olsen

25th October 2010, 09:40 PM	#17
platypus diyAudio Member Join Date: Mar 2010	Yes. I would also be interested.

26th October 2010, 05:50 PM	#18
Marky Mark diyAudio Member Join Date: Oct 2010	p { margin-bottom: 0.08in; } I am interested in purchasing 10 of these as I know this would be the best reproduction of sound my ears have ever heard.

26th October 2010, 10:21 PM	#19
reytnz diyAudio Member Join Date: Apr 2010 Location: Wellington, NZ	Interested as well

27th October 2010, 04:07 AM	#20
syyma diyAudio Member Join Date: Apr 2008 Location: SF Bayarea	Interested and would like to know the price too.

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read