|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
27th September 2010, 06:19 PM
|
#1 |
|
diyAudio Member
Join Date: Sep 2010
Location: Florida
|
Counterpoint SA-3.1 Rebuild
Hi, I am doing a complete rebuild on my Counterpoin SA-3.1 and had a question. I was able to download a schematic for the 3.1 from Audio-Circuit.dk and if shows using 1uf/200v P.P caps for the phono sections as well as the line stage output coupling caps C18,20,118,120. The originals caps are 3uf Wonder caps, also the 2 watt plate load resistors for the line stage show 13k on the schematic, the original are 22k. All other values are the same. I have never been great with the math (lazy I guess). Will using 1uf caps or the 13k resistors cause a problem.
Thanks in advance, Ron |
|
|
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| counterpoint Sa 5.1 | max29 | Tubes / Valves | 291 | 31st December 2012 01:17 AM |
| counterpoint sa-100/sa-220 schematics? | Williams Audio | Solid State | 14 | 1st June 2006 09:47 AM |
| counterpoint sa-100/sa-220 schematics? | Williams Audio | Analog Line Level | 3 | 24th February 2006 05:46 PM |
| Counterpoint SA 7.1 | ppridday | Swap Meet | 3 | 17th October 2004 07:07 PM |
| New To Site? | Need Help? |
