diyAudio (
-   Tubes / Valves (
-   -   Rset values for IXYS IXTP01N100D (

JLH 22nd September 2010 05:56 AM

Rset values for IXYS IXTP01N100D
1 Attachment(s)
I don't know if anybody has put this info out here yet, but thought I would share it. I was in the process of setting up a few CCSs for an up coming project and decided to collect some data while I was at it. I hope you guys find this usefull the next time you go to use the IXYS IXTP01N100D. These values will get you in the ball park.

Rgs, JLH

P.S. The gate stop resistors are 220 ohm Allen Bradley carbon comps.

Michael Koster 22nd September 2010 05:18 PM

2 Attachment(s)

Here is my result for testing a single device with 30V d-s.

It looks like there is a substantial difference between your measurement and mine. Difference due to Vds being ~3V over the bottom device in the cascode vs. 30V in my measurement?

JLH 22nd September 2010 07:07 PM

On my measurements, I varied the B+ from 75V to 220V and it made no difference in current. The cascode appears to be fairly immuned to changes in B+ supply.

Rgs, JLH

45 24th September 2010 06:11 PM

Have you tried with 2 mA too? Is there any issue with such current value?


Michael Koster 24th September 2010 07:09 PM


Originally Posted by 45 (
Have you tried with 2 mA too? Is there any issue with such current value?


I would use the IXTP01N100D part down to about 1 mA. For 1 mA and below I would use the LND150.


TonyTecson 7th March 2012 06:24 AM

did you have Rset for LND150? can you post here please? thanks..

All times are GMT. The time now is 02:39 AM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999-2017 diyAudio

Content Relevant URLs by vBSEO 3.3.2