I have a similar question.
First time buy with a CT 350-0-350.
Using PSUII I need to select Full Wave and insert 350V as the voltage to get around 350 Volts(of course depending on the filtering I choose)?
If I need 700V I would connect the 2 outer cables to a bridge (Centre tap goes to ground?)
Yes, to get 700V out of a 350-0-350 transformer, you need to leave the center tap unconnected, although I'm unclear on what current you could get out of it (no free lunch).
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.