I have 2 different Kits in my possession and I would like to get them to work together.
1st kit: Glassware PS-4 tube PS
2nd Kit: Triode Electronics ST-70 mic preamp project
I am running the PS-4 with the 10K/ 5w series resistor and 47uF/450v PS caps with B+ going to eyelet 20 on the ST-70 board. What I don't know is what to hookup to eyelet 19? Triode has a Tube rect PS schematic for the preamp that shows another 10K series resistor and 100uF cap for eyelet 19. Do I need that coming off the PS-4 power supply to make the preamp work or can I just hook up 19 and 20 to B+?
I was also wondering if anyone can tell me if the mic pre is a MU follower? Link to Triode ST-70 mic pre and PS examples
http://site.triodestore.com/st-70-mp-project.pdf
and link to Glassware PS-4 PS schem
http://ep.yimg.com/ca/I/glass-ware_2114_713763
1st kit: Glassware PS-4 tube PS
2nd Kit: Triode Electronics ST-70 mic preamp project
I am running the PS-4 with the 10K/ 5w series resistor and 47uF/450v PS caps with B+ going to eyelet 20 on the ST-70 board. What I don't know is what to hookup to eyelet 19? Triode has a Tube rect PS schematic for the preamp that shows another 10K series resistor and 100uF cap for eyelet 19. Do I need that coming off the PS-4 power supply to make the preamp work or can I just hook up 19 and 20 to B+?
I was also wondering if anyone can tell me if the mic pre is a MU follower? Link to Triode ST-70 mic pre and PS examples
http://site.triodestore.com/st-70-mp-project.pdf
and link to Glassware PS-4 PS schem
http://ep.yimg.com/ca/I/glass-ware_2114_713763