Best Complete KT88 Amp Kit under $1K? - diyAudio
Go Back   Home > Forums > Amplifiers > Tubes / Valves
Home Forums Rules Articles diyAudio Store Gallery Wiki Blogs Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 15th June 2010, 03:26 AM   #1
ZenZoo is offline ZenZoo  United States
diyAudio Member
Join Date: Jun 2010
Default Best Complete KT88 Amp Kit under $1K?

I've been lurking here for a while, but this is my first post so please be gentle.

I'm looking to build my first Tube Amp and would like to start out with a compete DIY Kit and am looking for recommendations. Preferably one with good instructions, descriptions, pics, etc. A complete starter kit would be nice so I'm not hunting for months for all the parts.

I'm considering the Dynaco VTA ST-120 from Bob Latino which is 60wpc
tube4hifi ST70 page
I'd prefer building mono's, but am still considering this one because it can be ran in mono as well... of course I'd have to build a 2nd one down the road if I like this one enough to do so.

I'd like to stick with a KT88 design as I have about a dozen of them laying around, but would consider other options as well. I'll be powering a pair of Von Schweikert VR4 SR MKII's which are 92db. However, Albert (the designer/mfg) says they are pretty power hungry and recommends solid state rather than unless unless I get ones with sufficient power. I've been running them with a McIntosh MC2102 which is 100wpc and is certainly ample. My room is 25'x25'x9' and I listen to a wide variety of music and occasionally at higher volumes, but generally it's moderate volumes with female vocals, acoustic or live music.

These Von Schweikert are wonderful and musical speakers and would like to reward them with a similar amp. Preferably for under $1K (excluding tubes and chassis) if I can get away with it. I'm hoping this will be the first of many projects to come... Tube Pre-Amp, Tube DAC, Phono Stage, etc.

Thank you for your consideration - I look forward to spending some quality time here!
  Reply With Quote
Old 15th June 2010, 03:43 AM   #2
diyAudio Member
aardvarkash10's Avatar
Join Date: Mar 2007
Location: Auckland, NZ
a little over your pricepoint for a pair, but solid and simple build. And monobloc design straight up. Enough power? You be the judge.

Edit - ok, within your range since they include tubes abd chassis. Spend the differnece on boutique stuff of your liking...
"It may not be easy for some to not hear differences, even if they are not there." - Vacuphile,

Last edited by aardvarkash10; 15th June 2010 at 03:46 AM.
  Reply With Quote
Old 15th June 2010, 04:18 AM   #3
diyAudio Member
Rockmore's Avatar
Join Date: Jun 2009
Location: Red, White, and Blue USA
Zen- for that kind of money, get yourself one of Will Vincent's remarkable builds, and save money on top of that. he always has something on Audiogon.
  Reply With Quote
Old 15th June 2010, 04:26 AM   #4
diyAudio Member
Join Date: Jun 2010
Try two of the triode electronics MK III 60W monoblock kits imo. The st120 would also be a nice choice. I built a VTA st70 kit and the thing works great. Clear/easy to follow instructions and all of the parts are included.
  Reply With Quote
Old 15th June 2010, 04:38 AM   #5
ZenZoo is offline ZenZoo  United States
diyAudio Member
Join Date: Jun 2010
Thanks aardvarkash10 - I know not all watts (or OddWatts) are created equal, so I'll keep it in mind. But for now I'd like to look for something with a little more power.

Thanks Rockmore - Will Vincent does have some nice gear and plenty of power... but I couldn't find any DIY Kits. That's the main reason I'm here - I want to start building my own. If you have a link, please ship it my way. Thanks!
  Reply With Quote
Old 16th June 2010, 11:05 PM   #6
ZenZoo is offline ZenZoo  United States
diyAudio Member
Join Date: Jun 2010
Thanks Coherent - It looks like all of these are variation on the Dynaco Line. So I'm still leaning toward the ST-120, unless I find something more attractive in the upcoming weeks.

If anyone has other suggestions, please let me know. I'm also not opposed to one that is completely point to point, although I really haven't come across any that fit my needs. Thank for your help!
  Reply With Quote
Old 17th June 2010, 01:21 AM   #7
rmyauck is offline rmyauck  Canada
diyAudio Member
Join Date: Apr 2009
The Triode ST-70 board is a Williamson design I believe which is supposed to give more detail in the sound. The output trans are probaby the same as the ST-120 uses. MarK III type. The newer ST-70 board with EF86 input & ECC99 inverter splitter tube would be the board to use as mentioned previously on this form by a member experienced with it. It looks like the board Triode offers for Mark III Mono is the older one. If you want mono you would need 2 boards. You would leave each a bit less populated with parts. (Gives you a few spares) Use an aftermarket PS boards too such as Geek's which allows independent bias for each output tube and other good features. You can then run KT-88's with the upgraded PS transformers available for the MIII for 60W/CH. You could probably spend a bit more on the output transformers if desired. Maybe Edcor is as good or better than Dynaco copies for less $. I think under $95 ea and PS trans are less too. If your handy make your own bases using metal pates with wood sides to save $ and can be made to look great. Hide circuit boards under plate for wife appeal & safety. Look at amp pics on this form and tubelab section on this form has a pic's section too. Should be doable for under 1K and maybe a bit over with expensive but great sounding Gold Lion KT-88 OT tubes.

Last edited by rmyauck; 17th June 2010 at 01:33 AM. Reason: add info
  Reply With Quote
Old 17th June 2010, 02:12 PM   #8
diyAudio Member
boywonder's Avatar
Join Date: Jan 2008
Location: So.Cal.
Originally Posted by ZenZoo View Post

If anyone has other suggestions, please let me know. I'm also not opposed to one that is completely point to point, although I really haven't come across any that fit my needs. Thank for your help!
Updated Mullard 5-20 monoblock design with KT88's for around 60wpc:

"Mullard 5-20 KT88 PP blocks!

Further iteration of the KT88 5-20 design using MOSFET followers:

OPUS 5.0 A Modern Mullard

A little more complex for additional performance.
  Reply With Quote
Old 2nd December 2012, 12:14 PM   #9
diyAudio Member
freax's Avatar
Join Date: Sep 2007
I wonder if ZenZoo knows about this, its a bit late (2 years) but its better late than never:
KT88 SE Basic or Master Kit
diyaudio is against your rights. I do not have the right to be forgotten and after asking the issue has been ignored, therefore I'm leaving (peacefully) for this reason. I stand up for my rights. So long and thanks for all the Fish
  Reply With Quote


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Power amp kit for a complete newbie FlorianO Tubes / Valves 6 21st August 2006 01:38 AM
Amp or Pre-amp Complete kit fcel Solid State 2 19th September 2001 01:53 PM

New To Site? Need Help?

All times are GMT. The time now is 12:19 PM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999-2017 diyAudio

Content Relevant URLs by vBSEO 3.3.2