• WARNING: Tube/Valve amplifiers use potentially LETHAL HIGH VOLTAGES.
    Building, troubleshooting and testing of these amplifiers should only be
    performed by someone who is thoroughly familiar with
    the safety precautions around high voltages.

parallel pp EL84

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
TheGimp

TheGimp

Member
Joined 2009
Push Pull amp with EL84 is 8K to 10K plate to plate load. So if you run parallel Push Pull with two tubes per side you will need to reduce the plate impedance by a factor of two. Therefore 4K to 5K P-P is proper load.

So yes. You can use a 5K p-p transformer for parallel push pull with EL84.
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom