|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum |
| diyAudio Sponsor | ||
|
||
 |
|
|
Thread Tools | Search this Thread |
24th May 2010, 02:37 AM
|
#1 |
|
diyAudio Member
Join Date: Aug 2005
|
AD1 Operating Question
Hi, just wondering if operating the AD1 with a 5K load, 200~220V on the plates and a bias of around -40V at 50mA is a sensible load. Looking at the original datasheets, it looks good, but looking at the EML, it looks a little under. The reason why I want this operating point is that it is very similar to the operating point of a 45 amp, and I want to be able to swap between the two (with the correct heaters of course). Cheers!
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| WTB: NOS matched pairs of AD1/4683/RBiii tubes | Icarium | Swap Meet | 1 | 4th September 2009 07:01 AM |
| WTB: Matched Pair of NOS AD1 tubes | Icarium | Swap Meet | 0 | 26th August 2009 07:53 AM |
| DC offset stability and operating point question. | nobody special | Solid State | 2 | 21st September 2004 02:04 PM |
| really dumb question about SE 6bq5 operating point (triode) | zobsky | Tubes / Valves | 5 | 10th April 2004 12:07 PM |
| tweeter operating power | madinoz | Multi-Way | 8 | 9th March 2004 11:17 PM |
| New To Site? | Need Help? |
| Page generated in 0.07208 seconds (68.91% PHP - 31.09% MySQL) with 10 queries |
