• WARNING: Tube/Valve amplifiers use potentially LETHAL HIGH VOLTAGES.
    Building, troubleshooting and testing of these amplifiers should only be
    performed by someone who is thoroughly familiar with
    the safety precautions around high voltages.

CXPP100-MS-3.3K or CXPP100-MS-4.2K

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
rsumperl

rsumperl

Member
Joined 2009
Greetings everyone,
So the time has come to order an output transformer. My tubes will be
6MJ6/6LQ6/6JE6C in AB1 P-P. The plate supply is a regulated 500v @ 500ma, screen is a regulated 225v @ 150ma and the bias is an adjustable regulated
-100v. I am not looking for max power, but a compromise between power and distortion. So, I am considering either the Edcor CXPP100-MS-3.3K or CXPP100-MS-4.2K. Should I also be looking at the CXPP100-MS-2.5K or CXPP100-MS-5K?

Thanks everyone,
Ray
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom