|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum |
| diyAudio Sponsor | ||
|
||
 |
|
|
Thread Tools | Search this Thread |
2nd January 2010, 08:06 PM
|
#1 |
|
diyAudio Member
Join Date: Jan 2010
|
Need Help Biasing TRV-M300SE Amps
Hi All,
I own a pair of Triode Corporation TRV-M300SE mono-block power amps and would like to install a new quad set of TJ 300B mesh (perforated) plate tubes. I have read these amps operate on a FIXED BIAS principle but the included operating manual does not list any information about the biasing procedure required when installing 300B tubes. I have contacted Triode Corporation asking for assistance without success. More so I do not have access to any circuit diagram. I have included a photo of the inside and am hoping for some guidance and instructions in reference to adjusting the pots shown at VR2 and VR3. A million thanks in advance for any assistance provided. |
|
3rd January 2010, 06:42 PM
|
#3 |
|
Speakerholic
diyAudio Moderator
Join Date: Jan 2004
Location: British Columbia
|
Thread closed.
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Input Biasing | sepulchre | Parts | 7 | 24th April 2009 03:30 AM |
| Biasing | fauxpas | Tubes / Valves | 4 | 3rd January 2008 08:06 AM |
| low-biasing or high biasing in Class-AB amps | Workhorse | Solid State | 124 | 18th October 2005 04:45 AM |
| Biasing | Wyatt Turk | Tubes / Valves | 10 | 1st October 2004 02:11 PM |
| New To Site? | Need Help? |
| Page generated in 0.07163 seconds (69.61% PHP - 30.39% MySQL) with 11 queries |
