small binding post for TT ground

wicked1 · 20th December 2009, 05:32 PM

Anyone know where to get small binding posts for a phono pre TT ground? I don't want to use a big speaker post.

Thanks

pjanda1 · 20th December 2009, 07:06 PM

This little guy is the second hit you get when searching "binding post" at Mouser. I think it is the one I'm using.

Paul
Wild Burro Audio Labs - DIY Full Range Speakers

wicked1 · 20th December 2009, 07:08 PM

Thanks, I finally looked there. I had been looking at all the audio places try to find something fancy, but that from mouser will do perfectly.

kavermei · 20th December 2009, 07:36 PM

I hate to be a bore, but why is this is the tubes/valves section?

wicked1 · 20th December 2009, 08:31 PM

people here give the correct suggestion. Asking elsewhere on this site usually leads me way off in the wrong direction. People here are in the right frame of mind for suggesting parts for tube amps. (guess it doesn't matter for something like a ground binding post, though)

Ty_Bower · 20th December 2009, 09:14 PM

Quote:

Originally Posted by kavermei

I hate to be a bore, but why is this is the tubes/valves section?

He needs parts for the vacuum tube phono-pre he is building. That's forum appropriate, isn't it?

dhaen · 20th December 2009, 09:25 PM

A better class of people hang out here

kavermei · 21st December 2009, 08:39 AM

Quote:

Originally Posted by Ty_Bower

He needs parts for the vacuum tube phono-pre he is building. That's forum appropriate, isn't it?

Uhmm... you cann't know that from post #1

kavermei · 21st December 2009, 08:42 AM

Quote:

Originally Posted by dhaen

A better class of people hang out here

I don't read the other forums, but I'll take your word for it

Geek · 21st December 2009, 08:45 AM

Parts-Express.com:*Gold Binding Post Pair Insulated | binding post speaker connector speaker terminal gold speaker connector audio connector

Good bang for the buck.

Cheers!

20th December 2009, 07:36 PM	#4
kavermei diyAudio Member Join Date: Jan 2005 Location: Lokeren, Belgium	I hate to be a bore, but why is this is the tubes/valves section? __________________ Never send a human to do a machine's job. --Agent Smith

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
TT signal ground v. chassis ground and hummmmmmm	texaslonghorn	Analogue Source	0	25th November 2009 02:30 AM
Binding Post Crossthread, Help!!	dmongrain	Parts	6	23rd February 2009 08:27 PM
SpeakON vs five way binding post	ashok	Parts	1	3rd March 2006 03:23 PM
binding post	yuval	Chip Amps	1	19th May 2004 02:40 PM
Binding post suggestions	r0cket-	Parts	2	28th August 2003 02:16 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read

20th December 2009, 05:32 PM	#1
wicked1 diyAudio Member Join Date: Jan 2008	small binding post for TT ground Anyone know where to get small binding posts for a phono pre TT ground? I don't want to use a big speaker post. Thanks

20th December 2009, 07:06 PM	#2
pjanda1 diyAudio Member Join Date: Jan 2005 Location: The Nebraska Panhandle	This little guy is the second hit you get when searching "binding post" at Mouser. I think it is the one I'm using. Paul Wild Burro Audio Labs - DIY Full Range Speakers

20th December 2009, 07:08 PM	#3
wicked1 diyAudio Member Join Date: Jan 2008	Thanks, I finally looked there. I had been looking at all the audio places try to find something fancy, but that from mouser will do perfectly.

20th December 2009, 08:31 PM	#5
wicked1 diyAudio Member Join Date: Jan 2008	people here give the correct suggestion. Asking elsewhere on this site usually leads me way off in the wrong direction. People here are in the right frame of mind for suggesting parts for tube amps. (guess it doesn't matter for something like a ground binding post, though)

20th December 2009, 09:25 PM	#7
dhaen diyAudio Moderator Emeritus Join Date: Jun 2002 Location: U.K.	A better class of people hang out here

21st December 2009, 08:45 AM	#10
Geek diyAudio Member Join Date: Sep 2004	Parts-Express.com:*Gold Binding Post Pair Insulated \| binding post speaker connector speaker terminal gold speaker connector audio connector Good bang for the buck. Cheers!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)