Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum

How much capacitance for tube rectified PSUs?
How much capacitance for tube rectified PSUs?
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 26th May 2003, 12:36 AM   #1
JoeBob is offline JoeBob  Canada
diyAudio Member
 
JoeBob's Avatar
 
Join Date: Nov 2001
Location: Montreal, Canada
Default How much capacitance for tube rectified PSUs?

Here's what my idea is so far. A choke input PSU using a 240VAC transformer rectified using a 5AR4, fed into a 10H choke, then 300uF, then another 10H choke followed by another 300uF. Is this too much capacitance for the tube rectifier to take? First amp using tube rectifiers... If so, what values should I use? I've already got the two 10H chokes, so those values are set.
  Reply With Quote
Old 26th May 2003, 01:15 AM   #2
fdegrove is offline fdegrove  Europe
diyAudio Senior Member
 
fdegrove's Avatar
 
Join Date: Aug 2002
Location: Belgium
Default NO PROB.

Hi,

The GZ34/5AR4 only cares about the capicitance it sees before the choke.

Since you intend to use a LCL filter it shouldn't matter.

What can occur though is that the chokes go into full saturation/conduction but that would depend on the load...so no further comment so far.

Don't worry, you'll be fine.
__________________
Frank
  Reply With Quote
Old 26th May 2003, 01:37 AM   #3
Brett is offline Brett
diyAudio Member
 
Brett's Avatar
 
Join Date: Jan 2002
Model it in PSUD to make sure it's not going to saturate the choke or exceed either the peak or average current of the GZ34.
  Reply With Quote
Old 26th May 2003, 02:13 AM   #4
JoeBob is offline JoeBob  Canada
diyAudio Member
 
JoeBob's Avatar
 
Join Date: Nov 2001
Location: Montreal, Canada
Well, thanks. I knew in a CLC circuit the second C could be larger than the first, but I knew not about choke input circuits. I feel better about it, since I already had the six 100uF caps that config qould be
  Reply With Quote

Reply


How much capacitance for tube rectified PSUs?Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
learning tube rectified psu milen007 Tubes / Valves 26 21st September 2008 01:28 PM
Looking for a PCB / kit for a bipolar tube rectified PSU luvdunhill Tubes / Valves 10 16th August 2007 02:23 PM
PSU question? Going tube rectified sbelyo Tubes / Valves 47 2nd June 2006 10:27 PM
tube rectified preamp schematic sv62 Tubes / Valves 14 30th June 2004 11:16 AM


New To Site? Need Help?

All times are GMT. The time now is 12:18 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio
Wiki