|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum |
| diyAudio Sponsor | ||
|
||
 |
|
|
Thread Tools | Search this Thread |
30th November 2009, 04:00 AM
|
#1 |
|
diyAudio Member
Join Date: Aug 2005
|
Need help choosing a filament supply
I need a 6.3v filament supply to feed a pair of diode tubes (6DT4, 6U4 or 6AU4) . Also I might run a pair of 5965 tubes with it as well.
I'm not sure which Hammond to get ie how many amps. I also need a simple DC filament board to go with it. If anyone has a schematic or one is available that's good and reasonable. Appreciate it. |
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| K-502 Filament supply (or K-12M) | jmillerdoc | Tubes / Valves | 6 | 18th November 2009 12:59 AM |
| Yet another DHT filament supply | astouffer | Tubes / Valves | 25 | 5th July 2009 11:08 PM |
| Parallel vs. series filament supply - or another filament idea | engels | Tubes / Valves | 11 | 13th May 2007 01:06 PM |
| DC filament supply LC or CL | TBM | Tubes / Valves | 1 | 7th August 2005 07:26 PM |
| When using a DC filament supply on a DHT... | Saurav | Tubes / Valves | 31 | 18th September 2003 05:03 AM |
| New To Site? | Need Help? |
| Page generated in 0.05993 seconds (62.58% PHP - 37.42% MySQL) with 10 queries |
