• WARNING: Tube/Valve amplifiers use potentially LETHAL HIGH VOLTAGES.
    Building, troubleshooting and testing of these amplifiers should only be
    performed by someone who is thoroughly familiar with
    the safety precautions around high voltages.

PSUD II soft start

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
I've been using Duncans PSUD program...I'm getting my target voltages , using the soft start option really dials it in just fine. Two questions, what is the particular circuit Duncan is using for the soft start sim? Further, my sim put a 200 millisecond spike above my rating, topping at 400mA draw on my select transformer...however "my" transformer is rated for 300mA...........will that just wind up opening the windings or what? .:: Bazzi Amplifiers ::.

_______________________________________________Rick............
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.