diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Tubes / Valves (http://www.diyaudio.com/forums/tubes-valves/)
-   -   AnalogMetric 6L6GC SE amp kit...thoughts about this kit? (http://www.diyaudio.com/forums/tubes-valves/154365-analogmetric-6l6gc-se-amp-kit-thoughts-about-kit.html)

jmillerdoc 3rd November 2009 01:44 AM

AnalogMetric 6L6GC SE amp kit...thoughts about this kit?
 
1 Attachment(s)
Hello,
I recently found this rather inexpensive kit on the internet. Using their parts it appears it could be built for around $400 and some change. I was wondering if anybody had any experience with this circuit or kit. I was thinking of point to point cloning it mostly b/c I have many of the parts on hand. I would love to have a comment from someone who has actually hearn this amp.
Thanks,
Jeff

Link to the amp kit webpage:
6L6 SE Tube Power Amplifier (2 Channel) DIY Kit_Power Amp DIY Kit_Tube Amplifier Kit_Analog Metric DIY Audio Kit Online Store

jmillerdoc 3rd November 2009 01:50 AM

Quick correction....the total using their parts (amp module/PCB, OPTs, Power trafo, and choke) ordered from the website altogether totals right at $330. This includes all of the tubes too. All that appears to be required to build it is a chassis, wire, and RCA, Pot, Binders, etc....I roughly estimated about $100 more for the additional stuff if kept to reasonably priced midrange quality parts.
I do have a hard time believing their $60 per pair of 10W SE OPTs will sound very good.
Jeff

miklos 16th November 2009 02:51 PM

Give it a try, if the OPT sounding bad, invest the extra money in a pair better ones.


All times are GMT. The time now is 10:18 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2