#26 pre amp - Page 314 - diyAudio
Go Back   Home > Forums > Amplifiers > Tubes / Valves

Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 3rd April 2013, 07:05 PM   #3131
diyAudio Member
 
merlin el mago's Avatar
 
Join Date: Sep 2009
Location: Catalonia - Europe
These white are 4 x 24AWG all teflon copper silver plated, screen is also copper silver plated, inside and outside dielectric is always PTFE
  Reply With Quote
Old 3rd April 2013, 09:16 PM   #3132
diyAudio Member
 
Join Date: May 2009
Quote:
Originally Posted by Vinylsavor View Post
Hi!

Congrats for the beautiful build Felipe!



I agree! While you are at it you might want to try a pure choke input filter. I am using LCLCLC for preamps with the last LC separate for each channel

Best regards

Thomas
Will try...but a small input capacitor makes the magic also...)
  Reply With Quote
Old 3rd April 2013, 09:31 PM   #3133
diyAudio Member
 
Join Date: Aug 2005
Quote:
Originally Posted by merlin el mago View Post
These white are 4 x 24AWG all teflon copper silver plated, screen is also copper silver plated, inside and outside dielectric is always PTFE
Looks nice, do you strand the 4 wires?
  Reply With Quote
Old 4th April 2013, 08:56 AM   #3134
diyAudio Member
 
merlin el mago's Avatar
 
Join Date: Sep 2009
Location: Catalonia - Europe
Quote:
Originally Posted by rclourenco View Post
Looks nice, do you strand the 4 wires?
It is the same cable that Erno Borbely uses in his house.
Attached Images
File Type: jpg DSC00308.jpg (467.4 KB, 436 views)
  Reply With Quote
Old 4th April 2013, 04:40 PM   #3135
diyAudio Member
 
merlin el mago's Avatar
 
Join Date: Sep 2009
Location: Catalonia - Europe
Default 100K Noble pot

Hey guys,
I want to improve my 100K Noble pot, how can do it: see pics?
TIA
Felipe
Attached Images
File Type: gif VolumePotParallelwiringdiagram.gif (5.3 KB, 390 views)
File Type: gif VolumePotParallelwiringdiagram mod.gif (15.9 KB, 381 views)
  Reply With Quote
Old 4th April 2013, 05:06 PM   #3136
diyAudio Member
 
Join Date: Feb 2003
Location: West Coast of Norway
Is it the shunt mod you are thinking of?
Shunt Pot Volume Control for Better Sound and/or Gain Reduction - World-Designs-Forum
Click the image to open in full size.

Click the image to open in full size.
  Reply With Quote
Old 4th April 2013, 05:36 PM   #3137
diyAudio Member
 
Join Date: Aug 2005
Quote:
Originally Posted by merlin el mago View Post
It is the same cable that Erno Borbely uses in his house.
Thanks Filipe.
En hora buena por tu implementación del preamp.
  Reply With Quote
Old 4th April 2013, 05:43 PM   #3138
diyAudio Member
 
merlin el mago's Avatar
 
Join Date: Sep 2009
Location: Catalonia - Europe
Quote:
Originally Posted by rclourenco View Post
Thanks Filipe.
En hora buena por tu implementación del preamp.
Muchas gracias Thank you very much.
  Reply With Quote
Old 4th April 2013, 05:49 PM   #3139
diyAudio Member
 
merlin el mago's Avatar
 
Join Date: Sep 2009
Location: Catalonia - Europe
Quote:
Originally Posted by bambadoo View Post
Now I'm trying like attached pic, not exactly shunt but sounds very good, I use two 18k Shinkoh resistor and the improvement is big.

What do you think about the resistor value for shunt type also 18-20K?

TIA
Felipe
Attached Images
File Type: gif VolumePotParallelwiringdiagram mod 20K.gif (12.3 KB, 65 views)
  Reply With Quote
Old 6th April 2013, 07:27 AM   #3140
diyAudio Member
 
amandarae's Avatar
 
Join Date: Oct 2004
Location: Diamond Bar, CA
Quote:
Originally Posted by amandarae View Post
Click the image to open in full size.


My 26 Preamp. Thanks for this thread and the helpful guys keeping this thread as educational as can be.

Abe
Hello guys,

Just want to add info about the umbilical cord. It is about 5 feet using 300V/16Ga twisted and encased with braided shield for the B+ and 0V, 200V/18Ga twisted and individually shielded (per pair) for the two filament raw DC wires. 16 Ga Copper shielded for IEC and 18Ga shielded for chassis connections. All wires were then enclosed in black nylon jacket with all shields tied together.

Connectors are Neutrik NLT8MP (chassis) and NL8MPR(cord ends) with pins +/- 1 for heater 1, +/- 2 for Chassis GND and IEC GND, +/- 3 for B+ and 0V, and finally +/- 4 for Heater 2.

Enjoying the preamp as I type.


Abe
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



New To Site? Need Help?

All times are GMT. The time now is 05:10 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright ©1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2