Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum

How to design a direct coupled SE amplifier?
How to design a direct coupled SE amplifier?
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 3rd September 2009, 08:03 PM   #1
keithpeter is offline keithpeter  United Kingdom
diyAudio Member
 
Join Date: Jul 2007
Default How to design a direct coupled SE amplifier?

Hello all

http://www.the-planet.org/6EM7.html

I came across the above circuit that cleverly uses a dual triode.

How would I recalculate this to suit (say) a 6J5/6V6 (triode mode) or similar. I'd like to work out how to do this myself rather than follow a crib sheet.

I've sussed that the trick is to use a high voltage drop across the cathode of the output triode and take that as the working point for the first triode.

PS if the first triode gets pulled out or has a poor base connection, is the output valve toast as well like in the Loftin White?

Cheers
  Reply With Quote
Old 3rd September 2009, 08:36 PM   #2
Miles Prower is offline Miles Prower  United States
diyAudio Member
 
Miles Prower's Avatar
 
Join Date: May 2005
Location: USA
Quote:
Originally Posted by keithpeter View Post
How would I recalculate this to suit (say) a 6J5/6V6 (triode mode) or similar. I'd like to work out how to do this myself rather than follow a crib sheet.
Figuring DC coupling is NBD. Just figure your loadline in the usual manner. Once you have the input stage calculated, you can figure out what your DC voltages to ground will be. All that's required is elevating the Vpp so that the Vgk and Vpk will be the same as you figured from the loadline.

Quote:
PS if the first triode gets pulled out or has a poor base connection, is the output valve toast as well like in the Loftin White?
That'll poof it for sure. Neither the 6J5 nor 6V6 were designed to withstand the grid current that will flow if it gets hit with near the whole Vpp. In this case, your best bet would be to sample the final's cathode voltage to a window detector or "crow bar" that will disconnect the HV DC in cases where excessive voltage is detected. That just might help protect your final in case something like that goes wrong.

Also, pay careful attention to your Vhk ratings, and add heater lift voltage to make certain that this rating is not exceeded.
__________________
There are no foxes in atheistholes
www.dolphin-hsl.com
  Reply With Quote
Old 3rd September 2009, 08:59 PM   #3
keithpeter is offline keithpeter  United Kingdom
diyAudio Member
 
Join Date: Jul 2007
Quote:
Originally Posted by Miles Prower View Post
Figuring DC coupling is NBD. Just figure your loadline in the usual manner. Once you have the input stage calculated, you can figure out what your DC voltages to ground will be. All that's required is elevating the Vpp so that the Vgk and Vpk will be the same as you figured from the loadline.
Thanks Miles, I'll play with some load lines. And look up protection circuits as 6V6s come expensive these days (used to take carrier bags full of Octal valves home as a teenager working in a music shop).
  Reply With Quote

Reply


How to design a direct coupled SE amplifier?Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
JLH Direct-Coupled High Quality Stereo Amplifier kimbo Solid State 104 6th July 2014 03:29 PM
GM70 SET direct coupled 2x30W monoblock amplifier noyan Swap Meet 3 15th February 2009 03:48 PM
An intriguing 300B SE-direct-coupled-amplifier Antonio Tucci Tubes / Valves 27 8th February 2006 09:34 AM
An intriguing 6S45P direct coupled 300B amplifier Antonio Tucci Tubes / Valves 27 22nd October 2004 11:06 AM


New To Site? Need Help?

All times are GMT. The time now is 12:02 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio
Wiki